Combined Environmental Testing
Compliance with Test Standards
Automotive
Electrical and Electronic Equipment, Including Precision Instruments
Aerospace — Avionics, Satellites, and Launch Vehicles
Vibration Testing Systems

Standard Models FX Series — Exciting Force: 16 to 60 kN

Environmentally Friendly Vibration Test Equipment

The FX Series consists of environmentally friendly vibration testing systems with enhanced energy-saving performance. Equipped with the advanced ECO Vibe advance energy-saving drive system, the FX Series reduces power consumption by up to approximately 36% compared with the previous ECO Vibe neo system. The system also monitors its internal temperature and regulates blower speed, simultaneously reducing blower power consumption and noise while improving energy efficiency and quiet operation.

Note: The vibration controller can be mounted in the console rack as an option.

Comparison of Energy-Saving Effects: ECO Vibe neo vs. ECO Vibe advance

Comparison of Noise Reduction Effects of Air-Cooled Blowers

Enhanced Performance

Improvement of Durability

The new feeder supplying power to the armature coil is break-resistant.
The linear guides used in the armature support mechanism have improved durability.
The newly designed rubber cover excels in durability and heat resistance.

Noise Reduction Improvement

Monitor the temperature inside the equipment and control the blower speed to suppress it.
Significantly reduce the blower’s power consumption and noise.
Reduce noise by up to approximately 13dB compared to conventional products.
Reduce the perceived noise volume by about 1/5.

Specifications

Item Model		FX-16K/56	FX-26K/60	FX-35K/60	FX-40K/60	FX-60K/60
Rated Force	Sine	16.0 kN _0-p	26.0 kN _0-p	35.0 kN _0-p	40.0 kN _0-p	60.0 kN _0-p
	Random	16.0 kN rms	26.0 kN rms	35.0 kN rms	40.0 kN rms	60 kN rms
	Shock(6ms)	35.2 kN _0-p	57.2 kN _0-p	77.0 kN _0-p	100 kN _0-p	150 kN _0-p
Frequency Range		～3000 Hz	～2400 Hz	～2200 Hz	～2200 Hz	～2500 Hz
Maximum Acceleration		1000 m/s² (★1)	1000 m/s² (★1)	1000 m/s² (★1)	1000 m/s² (★1)	870 m/s² (★1)
Maximum Velocity		2.3 m/s	2.3 m/s	2.0 m/s	2.0 m/s	1.78 m/s
Maximum Displacement		56 mm _p-p	60 mm _p-p	60 mm _p-p	60 mm _p-p	60 mm _p-p
Maximum Payload		200 kg	400 kg	400 kg	400(500) kg (★2)	500 kg
Input power		27.9 kVA	35.3 kVA	53.3 kVA	64.6 kVA	82.6 kVA
Circuit breaker rating(200V/400V)		100/60 A	125/75 A	200/100 A	250/125 A	300/175 A
Power supply voltage		200 or 400 V	200 or 400 V	200 or 400 V	200 or 400 V	200 or 400 V
Power supply frequency		50 or 60 Hz	50 or 60 Hz	50 or 60 Hz	50 or 60 Hz	50 or 60 Hz
Number of Phases		3ϕ	3ϕ	3ϕ	3ϕ	3ϕ
Armature Mass		12.8 kg	23.0 kg	28.0 kg	36.0 kg	69.0 kg
Allowable Offset Load		500 N・m	700 N・m	900 N・m	900 N・m	1200 N・m
Cooling Method		Air Cooling	Air Cooling	Air Cooling	Air Cooling	Air Cooling
Model	Vibration Generator	916-X	926-X	936-X	936-AW/LA	960-AW/LA
	Power Amplifier	369A-0403A-16X	369A-0605A-26X	369A-0606A-36X	368A-0606B-36AW	368A-1007B-60AW
	Console Rack	CRD-1700-16X	CRD-2000-26X	CRD-2000-36X	CRD-2000W-36	CRD-2000W-60
Size	Table Pattern	PCD-200	PCD-200	PCD-300	PCD-300	PCD-400
	Vibration Generator	W1005×H866×D701 mm	W1232×H1034×D865 mm	W1336×H1152×D971 mm	W1125×H1200×D965 mm	W1452×H1297×D1231 mm
	Console Rack	W554×H1776×D1010 mm	W554×H1900×D1010 mm	W554×H1900×D1010 mm	W554×H2000×D1010 mm	W1108×H2009×D1010 mm
	Blower	W707×H1681×D908 mm	W707×H1681×D908 mm	W869×H1856×D1094 mm	W1094×H1856×D869 mm	W1147×H2016×D869 mm
Mass approx.	Vibration Generator	1200 kg	2100 kg	3500 kg	3900 kg	5000 kg
	Console Rack	440 kg	550 kg	600 kg	600 kg	800 kg
	Blower	220 kg	220 kg	325 kg	325 kg	450 kg

Lower limit frequency should be determined by a performance of an available vibration control system.

When exporting Vibration Testing System from Japan to overseas, Export License from the Ministry of Economy, Trade and Industry in Japan may be required depending on the specifications such as rated force. Please contact us for details.

(★1) Not a theoretical value, for limiting the maximum acceleration.

(★2) We will customize per your instructions.